Original Factory New ET-RH400-ER 10 Zone SMD Reflow Oven With PLC Control System China OEM SMT Assembly Line

• Extended cooling zone, Top3/bottom3 to ensure rapid cooling and the lowest board temperature;
• Strengthen the main hanger design and segmented guide rail design to ensure that the guide rail does not deform horizontally and vertically,
• and prevent the occurrence of board jamming and board falling;
• The new width adjustment structure ensures that the guide rail remains consistent from the entrance to the exit, and prevents the guide rail from having a bell mouth;
• The multi-layer insulation furnace design reduces the surface temperature of the furnace shell by 10 to 20 degrees, effectively reducing the working environment temperature;
• The temperature double-layer protection function can effectively prevent damage to the equipment body caused by abnormal temperature;
• The new waste gas recycling structure design reduces heat energy loss, while making the flux recovery more thorough and improving the heat conduction efficiency,
• and more calmly responding to the lead-free process requirements of more complex and larger welding products;
• Double track and dual speed, single machine cost, double production capacity, and energy saving of 60%;
• The furnace adopts a full enclosed design which is to prevent the N2 losing. The lowest nitrogen content: 150PPM.

Model

ET-RH10-ER

Size and power

Dimension(L*W*H)

6520*1426*1560MM

Exhaust volume

10m³/min*2(Channel)

Startup power

36KW

Normal power consumption

11-12KW

Heating system

No. Of hearing zone

Top10 Bottom10

Length of hearing zone

3950MM

Warming time

Approx.25min

Temperature setting range

Room temperature-300℃

Temperature control type

PID closed loop control, SSR driven

Temperature Control Precision

± 1.0℃

Temperature difference in temperature zones

Maximum 40℃

Max.temp.difference between preheat zones or solder zones

Maximum 80℃

Temperature deviation on PCB

± 1.5℃

Cooling system

No.of cooling zone

3(air oven Top3/Bottom3

Length of cooling zone

1200mm

Transport system

Rail structure

Integral segmented

Chain spec  

50-25 standard guide rail+standard single strand chain

Rail width adjust mode    

By motor+by Manual

Conveyor direction 

L→R (Option: R→L)

The max width of mesh

500MM

Max.PCB size

70-400MM single lane (Option: 450MM)

Conveyor height

900±20MM

Conveyor speed

300-2000mm/min

Fixed rail side

Single lane:front rail fixed(Option:rear rail fixed);

Dual lane:1,4 fixed(Option: 1,3 fixed)

Component height

Top 30mm Bottom 30mm

N2 system

N2 consumption

Option, Single lane:18-20m³/hr 300-1000PPM;

Dual lane:25-30m³/hr 300-1000PPM

Electrical configuration system

Power supply

3∮380V 50/60HZ(3∮220V 50/60HZ subject to technical agreement)

UPS system

Standard configuration

Alarm display

By sound and light （Yellow - temperature rise, Green - constant temperature, Red - abnormal）

FLUX service hint

Software prompt maintenance cycle

Date storage

Process data and status storage unlimited

IPC-CFX

Option

IPC-Hermes

Option